 |
This page is sponsored by Reese Products Co. |
|
This page is sponsored by Reese Products Co. |
New Products
Overdrive Inverter Prolongs Transmission and Brake Life Intermotive Products has developed a device that increases the durability, performance and safety of automatic transmissions and brake systems for Ford and Dodge chassis. The Overdrive Inverter is an electronic device that automatically shuts off overdrive with every engine start up while still enabling drivers to manually select overdrive using the stock overdrive button.
The Overdrive Inverter prolongs transmission life as much as 40 percent while also reducing brake pad temperatures up to 125°F and pad wear by up to 26 percent. It is approved by the California Environmental Protection Agency and the California Air Resources Board. The Overdrive Inverter takes approximately 10 to 15 minutes to install and provides operators with a one-time, low cost solution to these performance problems. For more information, contact
Coleman® Mach® 3 P.S.™ RV A/C More Cooling Using Less Power With the introduction of the Coleman Mach 3 P.S., RV owners can avoid the frustration of exceeding the limit of campground power supplied to the RV.
The design-mated components of the Mach 3 P.S. include a new high-efficiency compressor that lowers amp draw while still offering a high capacity for cold air production; a specially designed blower wheel that moves more air, yet requires less power to do it; enlarged evaporator and condenser coils that have raised lance fins to create more surface area to enhance heat dissipation; durable copper tubing that has a rifled interior wall, with the rifling creating turbulence in the flow of coolant that expedites the removal of heat from the air; a high-efficiency fan motor that is mounted directly to the bulkhead to fix the angle of the blower wheel and keep it turning freely; a blower wheel surrounded by a noise-reducing foam scroll; and a scroll that provides effective insulation. A downsized version of the Mach 3 P.S., the Mach 1 P.S., that draws only 9.3 amps while using 36% less power and producing 94% of the cooling capacity of a standard 13,500 nominal BTUH RV air conditioner is also available. For more information contact
Accurate Monitor System Now you can know the true level in your fresh and waste holding tanks with the Accurate Monitor System.
The system is designed to monitor one, two or three non-metallic holding tanks. You customize the panel buttons to match the number and types of tanks in the RV or boat by choosing from the variety of supplied button stickers. The Accurate Monitor System is a "do-it-yourself" kit that includes monitor panel, tank sensors and full illustrated instructions. The panel measures 3" x 9" and requires a 2-1/2" x 8" cutout. Hookup wire and panel mounting screws are not supplied with the kit. For more info, contact
_ RVN Follow this link for more new products
|
RV owners are recommended to manually de-select
overdrive every time they are driving in city traffic, over hilly terrain, or when heavily
loaded. Most drivers forget, and therefore incur higher brake and transmission maintenance
costs, as well as experience safety concerns due to overheated brakes. 
By matching a high-efficiency compressor, fan
motor and oversized coils, the Mach 3 P.S. air conditioner produces maximum cooling with
minimum amp draw. The unit delivers 102% of the cooling and uses 30% less power than a
standard 13,500 nominal BTUH RV air conditioner. 
Conventional systems that use in-the-tank probes often
fail due to corrosion or waste materials that clog the
sensors. The Accurate Monitor Sys-tem features sensors that mount on the outside and
actually read through the tank wall. 