Delivering the Goods

By Mark Penlerick
Engineering Team Leader
Blue Ox Towing Products

What does “delivering the goods” mean to you? Handing someone their new tow bar? Giving them a set of keys to their new coach? Successfully installing a taillight wiring kit? While it’s true these are examples of delivering the goods, there is another definition I’m going to concentrate on. The definition we’re concerned with reads as follows: To attain success or reach a desired goal. What is your goal? Every dealership has different goals but they probably all revolve around creating a profitable and successful dealership. How do you attain it? Loyal and knowledgeable customers that keep coming back...for all the right reasons. Many of you realize how profitable it is to sell aftermarket towing accessories. Unfortunately some of you also experience how expensive and frustrating it is if your customer is not armed with a complete and thorough knowledge of how to properly use their new toys. Customers may show up on your doorstep with damaged goods or call you with questions on the operation of the product. A lot of calls may stem from the customers expectations of what the product “should” do compared to what the product was actually designed to do. All of which cost you money but more importantly diminishes consumer confidence in your dealership and the product itself. Demonstrating and explaining the product and setting the customers expectations to match the products abilities is crucial. Above all you want the customer to operate the RV and any aftermarket products in a safe manner to protect themselves and those around them.

With that in mind, I suggest all dealership’s implement a “show-out” checklist for all products. It is even more crucial concerning aftermarket items such as towing products since there are so many important things that one can not afford to overlook. Having a checklist to follow will not only insure all information given is consistent no matter who trains the customer, but will also insure critical information is relayed. Most of you may already have something similar to this in place for the RV itself to demonstrate how to run the furnace, stove, refrigerator, generator etc. Do you do that because you are required to? Maybe…but more likely you do it because you want the customer to be comfortable with the operation of the RV and all of its components. This will allow them to operate it on their own, reducing questions and “customer inflicted” issues that may result in a trip back to your service bay, quite possibly at your expense. If you show the customer you’re willing to take the time to educate them, it will reflect very highly on you and your dealership. Lets visit what should be included in a show-out checklist, how they should be utilized and by whom?

What should be included? Everything that is necessary to insure the customer has a positive experience using the product. Of course you include the how to stuff, but just as important are the “what not to do’s” and the little tips that make using the product easier and safer. A lot of what you will demonstrate to them is in the product owner’s manuals so it is still very important to instruct them to read them after you’ve completed the show-out. I’ve included a sample checklist which, if followed, will arm the customer with an understanding of how to use their towing equipment. As you can see, it breaks a towing system into parts and gives a step by step of all the things that you should demonstrate or explain to the customer. These checklists need to include an explanation on hooking up or setting up the product prior to towing. They should include any adjustments that the customer can make, things to check and watch for, and maintenance they can perform. The checklist should include answers to questions that they may have after they leave the dealership. This is where you tap into the people that answer questions on the phone at your dealership to find out what the most common calls are concerning then add those answers to the checklist to train the customer ahead of time. An example would be the tension/compression question that we have asked of us about our Blue Ox tow bars. We have this on our checklist because customers have asked “why does one latch handle seem tight or locked and the other one loose or unlocked?” What they do not realize is the tow bar latch is spring loaded by design. Once the legs are extended and the latch handles “pop up”, it is always latched. What they are experiencing is one leg has pressure (compression) on it pushing against the latch so the handle feels “stiff” and not readily free to be depressed. The other may not have any pressure on it thus the handle depresses freely and the customer thinks, “Ah, this leg must not be latched.” This is just one example of something that could be demonstrated and explained to the customer right up front. Other good examples of things you can demonstrate to your customer, so they do not learn the hard way, are how to properly connect their safety cables, orientation of the attachment pins, the possible need for a drop receiver, how to service the tow bar and the fact that you should NEVER back up while towing.

Anyone at your dealership can use this tool, but it is most beneficial for the parts or service manager or the technician that does the installation work. It not only gives these individuals the opportunity to educate the customer, but also to get to know them. This personal connection between the customer and you builds your customer’s confidence in your knowledge and the quality of service your dealership provides. After all, who are they going to call if they have a problem or a question on something? So, about now you are thinking, “This is going to take too much time. When am I supposed to find time to do this”? I can understand that initial reaction but lets look at it in a different light. Consider it an investment in your future. It only takes a few minutes, but the benefit realized will pay dividends for years to come.

New from Parker is the full featured TireSaver Nitrogen
Generators for truck and automobile tire filling

By using dry nitrogen gas instead of compressed air to inflate tires, one will maintain proper inflation pressure and prevent one of the major causes of tire failures. That’s why many of the major tire manufacturers are now recommending the use of nitrogen for tire inflation.

Dry nitrogen gas will extend tire life by up to 25% and will improve fuel efficiency by up to 4%. In addition, it provides more consistent tire pressure and reduces or eliminates the need to check tire pressures and top off tires.

Other benefits to inflating tires with nitrogen include cooler run temperatures and elimination of rim corrosion and stem clogging.

There are four different systems available to service applications from a small repair garage to large fleet service stations. These wall mountable systems are designed to produce nitrogen gas from standard compressed air. The systems are shipped complete with an integral two stage system of protective pre-filters and a carbon filter enabling the tire inflation system to be used on any compressed air system. These systems can pay for themselves within a few months and offer a great value added service to customers.

With over 4000 systems installed worldwide the Parker TireSaver nitrogen generator has become the standard for tire filling.

For additional information or to arrange an appointment call the Technical Services Department at 1-800-343-4048 or 1-978-858-0505. Parker Hannifin Corporation, Filtration and Separation Division, 242 Neck Road, Haverhill, MA 01835. Fax: 978-858-0625. www.parkertiresaver. com.

Webb Wheel Updates Trailer Hub Lubrication Service Bulletin
 

Webb Wheel has issued updated Service Bulletin #59, covering recommended oil and grease lubrication volumes for tapered spindle (Webb part #2023) and parallel spindle (Webb part #2343) trailer hubs. Webb Wheel offers optional lubrication fill plugs for most popular part numbers. The amount of lubrication required will vary depending on the hub-cap, seal and lubrication manufacturer’s recommendation.

The information found in updated Service Bulletin #59 follows the TMC Recommended Practice RP631A “Recommendation for Wheel End Lubrication” A copy of this and other recent service bulletins issued by the company can be downloaded at http://www.webbwheel.com/aftermarket/service-servicebulletins. html.

Webb Wheel Products, Inc., headquartered in Cullman, Alabama, is a Marmon Highway Technologies company that manufactures hubs, brake drums, rotors and spoke wheels for medium and heavy-duty trucks, trailers and buses. Marmon Highway Technologies companies are members of The Marmon Group, an association of more than 100 companies that operate independently within diverse business sectors. Member companies have collective revenues of more than $5 billion.